Published in Oper Dent on January 01, 1980
Effects of contamination and mechanical disturbance on the quality of acid-etched enamel. J Am Dent Assoc (1980) 1.35
The ability of foods to stain two composite resins. J Prosthet Dent (1980) 1.15
The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater (2001) 1.12
Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent (1991) 1.11
Evaluation of new methods for composite repair. Dent Mater (1992) 1.03
Effect of liners on cusp deflection and gap formation in composite restorations. Oper Dent (2001) 1.01
The contribution of dental amalgam to mercury in blood. J Dent Res (1989) 0.97
The effect of dental amalgams on mercury levels in expired air. J Dent Res (1981) 0.94
Build-up and repair of light-cured composites: bond strength. J Dent Res (1984) 0.93
Comparative bond strengths of light-cured, heat-cured, and autopolymerizing denture resins to denture teeth. J Prosthet Dent (1989) 0.93
Radiopacity of compomers, flowable and conventional resin composites for posterior restorations. Oper Dent (1999) 0.92
Mode of failure in the dentin-adhesive resin-resin composite bonded joint as determined by strength-based (muTBS) and fracture-based (CNSB) mechanical testing. Dent Mater (2001) 0.91
Effect of stepped light intensity on polymerization force and conversion in a photoactivated composite. J Esthet Dent (2000) 0.91
Photo-activation of resin cements through porcelain veneers. J Dent Res (1991) 0.90
Microtensile bond strength testing and failure analysis of two dentin adhesives. Dent Mater (1998) 0.90
Fracture resistance of endodontically prepared teeth using various restorative materials. J Am Dent Assoc (1987) 0.89
Aerobic exercise, maternal self-esteem, and physical discomforts during pregnancy. J Nurse Midwifery (1987) 0.89
Effect of a silane coupling agent on composite repair strengths. Am J Dent (1994) 0.89
Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent (1991) 0.88
Effect of composite type, light intensity, configuration factor and laser polymerization on polymerization contraction forces. Am J Dent (1997) 0.86
Effect of polyethylene fiber reinforcement on the strength of denture base resins polymerized by microwave energy. J Prosthet Dent (1994) 0.85
Cast metal, resin-bonded prostheses: a 10-year retrospective study. J Prosthet Dent (1989) 0.85
Curing light-activated composite cement through porcelain. J Dent Res (1989) 0.84
Auxiliary retention for complete crowns provided by cement keys. J Prosthet Dent (1981) 0.84
Effect of ultrasonic vibration on post removal in extracted human premolar teeth. J Endod (1996) 0.83
Effect of polyaramid fiber reinforcement on the strength of 3 denture base polymethyl methacrylate resins. J Prosthodont (2001) 0.83
Effects of secondary curing on indirect posterior composite resins. Oper Dent (1997) 0.82
Cusp movement in premolars resulting from composite polymerization shrinkage. Dent Mater (1993) 0.81
Retention of cast crowns cemented to amalgam and composite resin cores. J Prosthet Dent (1981) 0.81
Effect of varying etching times on the bond strength of ceramic brackets. Am J Orthod Dentofacial Orthop (1996) 0.81
Dentin desensitizing agents: SEM and X-ray microanalysis assessment. Am J Dent (1997) 0.81
Auxiliary retention for intracoronal cast gold restorations. J Prosthet Dent (1980) 0.80
Creep of conventional and microfilled dental composites. J Biomed Mater Res (1984) 0.80
Dynamic viscoelastic behavior of resin cements measured by torsional resonance. Dent Mater (2003) 0.80
Interferometric measurements of cusp deformation of teeth restored with composites. J Dent Res (1993) 0.80
The effect of bonding agents on the interfacial bond strength of repaired composites. Dent Mater (1986) 0.80
Creep of posterior dental composites. J Biomed Mater Res (1985) 0.80
Mercury vaporization from corroded dental amalgam. Dent Mater (1988) 0.79
The use of debonding pliers in the removal of ceramic brackets: force levels and enamel cracks. Am J Orthod Dentofacial Orthop (1995) 0.79
The effect of removal of the smear layer on microleakage of Class V restorations in vitro. Dent Mater (1988) 0.79
Effects of polymerization techniques on uniformity of cure of large-diameter, photo-initiated composite resin restorations. J Am Dent Assoc (1986) 0.78
Effects of dentin permeability and hydration on the bond strengths of dentin bonding systems. Am J Dent (1993) 0.78
Polymerization shrinkage of composite resins: comparison with tooth deformation. J Prosthet Dent (1994) 0.78
Repair of conventional and microfilled composite resins. J Prosthet Dent (1983) 0.78
Effect of matrix systems and polymerization techniques on microleakage of Class II resin composite restorations. Am J Dent (1992) 0.77
Curing light-activated composite resins through dentin. J Prosthet Dent (1985) 0.77
Acid-etched, resin bonded cast metal prostheses: a retrospective study of 5- to 15-year-old restorations. Int J Prosthodont (1993) 0.77
Prediction of postpartum depression. NAACOGS Clin Issu Perinat Womens Health Nurs (1990) 0.77
Staining calcified dental tissues with food. J Prosthet Dent (1981) 0.77
Correlation between strength of bonding to enamel and mechanical properties of dental composites. J Biomed Mater Res (1982) 0.77
Debonding forces applied to ceramic brackets simulating clinical conditions. Angle Orthod (1994) 0.77
Effect of hybrid layer on fracture toughness of adhesively bonded dentin-resin composite joint. Dent Mater (1998) 0.77
Microleakage of indirect composite inlays. Dent Mater (1989) 0.76
Enhancement of resin bonding to heat-cured composite resin. Oper Dent (1997) 0.76
The effect of rotary instrumentation on the permeability of dentin. J Dent Res (1981) 0.76
The strength of multilayer and repaired composite resin. J Prosthet Dent (1978) 0.75
Effect of metal etching on crown retention. J Prosthet Dent (1986) 0.75
Routine circumcision of the newborn: reasonable precaution or unnecessary risk? J Nurse Midwifery (1981) 0.75
Creep of amalgam at low stresses. J Dent Res (1987) 0.75
Microleakage of amalgam restorations with high-copper content. J Am Dent Assoc (1979) 0.75
Auxiliary retention for cast gold restorations. Quintessence Dent Technol (1981) 0.75
Comparison of the retentive strength of two cast gold pin techniques. J Prosthet Dent (1979) 0.75
Effect of surface preparation on phase distribution of amalgam surfaces. J Dent Res (1978) 0.75
Mercury vapor expired after restorative treatment: preliminary study. J Dent Res (1979) 0.75
Commonly used treatment solutions as microorganism reservoirs. J Prosthet Dent (1980) 0.75
Bond strength and hardness of light-activated composite resins. J Biomed Mater Res (1984) 0.75
The fracture strength of amalgam overlying base materials. J Prosthet Dent (1980) 0.75
Shear strengths of ten commercial dentin bonding agents. Dent Mater (1987) 0.75
The effect of finishing on the anodic polarization of high-copper amalgams. J Oral Rehabil (1978) 0.75
Retentiveness of enamel-resin bonds using unfilled and filled resins. J Prosthet Dent (1982) 0.75
Marginal leakage: entry side and exit side-clinical implications. J Prosthet Dent (1981) 0.75
Bonding between acrylic laminates and composite resin. J Dent Res (1982) 0.75
Remineralization of dentin in vitro. Calcif Tissue Res (1976) 0.75
Effects of etching and rinsing times and salivary contamination on etched glass-ionomer cement bonded to resin composites. Dent Mater (1989) 0.75
Exhaled mercury following removal and insertion of amalgam restorations. J Prosthet Dent (1983) 0.75
The effect of surface finish on the anodic polarization of a conventional spherical amalgam. J Biomed Mater Res (1978) 0.75
Bond strength of cements to nickel-chromium and silver-palladium alloys. J Prosthet Dent (1985) 0.75
Serum indirect bilirubin levels and meconium passage in early fed normal newborns. Nurs Res (1987) 0.75
The effect of burnishing on the mercury vapor emission of amalgam. J Dent Res (1977) 0.75
Marginal leakage of compacted gold, composite resin, and high-copper amalgam restorations. J Prosthet Dent (1980) 0.75
Microleakage of pin-retained amalgam and composite resin bases. J Prosthet Dent (1980) 0.75
Acid-etch retained cast metal prostheses: a seven-year retrospective study. J Am Dent Assoc (1984) 0.75
Composite resin compatibility and bond longevity of a dentin bonding agent. J Dent Res (1985) 0.75
Microstructure of amalgam surfaces. J Prosthet Dent (1976) 0.75
Estimation of the phase distribution in dental amalgam with the electron microprobe. J Dent Res (1978) 0.75
Effect of clinical finishing procedures on amalgam microstructure. J Dent Res (1980) 0.75
The effectiveness of pins with complete cast metal crowns. J Prosthet Dent (1984) 0.75